11in DB25 Female Parallel Add-A-Port Adapter Cable with Bracket
#10338
C2G
DB25 Female Parallel Add-A-Port Adapter Cable with Bracket is rated
out of
5 by
7.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$7.99 $12.99 MSRP USD
Ensure smooth data flow from your parallel port. This adapter cable connects to the motherboard or I/O adapter via flat ribbon cabling. Compatible with most brands of motherboards and I/O cards. The 11-inch length exceeds the standard length of cables often provided with motherboards, and provides flexibility for your connection.
Connector 1:
(1) DB25 Female
Quantity
302 In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Product Line | C2G | ||
| UPC Number | 757120103387 | ||
| Country Of Origin | China | ||
| Application Sector | Residential, Commercial, Industrial | ||
| Warranty Type | Lifetime | ||
| Type | Cable, Adapter |
Dimensions
| Product Length US | 11.0 in | ||
| Cable Length | 0.92 ft |
Technical Information
| Jacket Material | PVC (Polyvinyl Chloride) | ||
| Cable Type | Parallel, Adapter | ||
| Jacket Rating | Standard / Non-Rated |
Resources
Cutsheet
Reviews
Rated 5 out of
5
by
Derek from
Cables appear exactly as they are
I bought this so that I could dump/flash the NAND of my Xbox 360. My motherboard didn't have on-board LPT but it did have the header that this cable was made for and it works beautifully. It dumped the NAND at least 6 times in 8 hours - taking half as long as it would have on my friend's on-board LPT machine. Overall, this product has cut my production time in half and at a quarter of the cost of other suppliers! If you need one, get one here.
Date published: 2010-05-11
Rated 4 out of
5
by
RECless from
Works great!
Pros: Worked just fine.
Cons: Pin 26 (KEY) isn't blanked out, allowing for reverse installation.
Other Thoughts: Length should be fine for any uATX motherboard and most ATX ones (Form Factor Width 9.6" +/- 2" vs 11.5" cable length)
For standardized headers, install with the red wire on the OPPOSITE side from the missing pin (26).
Date published: 2011-03-03
Rated 5 out of
5
by
Jeff from
Good LPT Cable for ASUS motherboards
ASUS doesn't include the LPT cable with their M3A76-CM motherboard. They sell one, but they admit on their website that it might be too short for some of their motherboards. The CablesToGo cable is about 11 1/2 inches long, and it can easily connect between the "Berg" header connector on the front left corner of the motherboard and the rear slot opening on the back of the case. I tested the CablesToGo cable on my new PC with a Canon S450 printer (using a parallel port cable) and it worked great. The red stripe on the cable is Pin 1, so look in the motherboard manual to find pin 1 on the "Berg" header, and plug it in so they match up. It works. Buy it.
Date published: 2010-01-13
Rated 4 out of
5
by
MochaMatt from
Works, but just barely long enough
My new motherboard lacks support for legacy parallel printer ports, but happens to have a 26-pin header, so this fits the bill to add a parallel port. The cable is about 11" long, which worked, but just barely.
Date published: 2010-05-11
Rated 5 out of
5
by
CSPLUS from
Done the trick for me.
The motherboard we were using did not come with a parallel port. This product was a very easy fix with easy installation and it worked great.
Date published: 2010-03-03
Rated 4 out of
5
by
JohnH from
Solved my parallel port printer problem
I installed this in a homebuilt computer, which had a header for a parallel port. This worked perfectly to connect my Gigabyte motherboard to my HP last printer. This cable was an optional part for my motherboard, but not readily available. Be sure your motherboard has a parallel port header before purchasing.
Date published: 2010-01-14
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Is this available with a Low Profile Bracket?
We do not carry this in a low profile bracket.
Date published: 2017-10-06
what Driver can i use for this port thanks
There is no driver with this cable. The driver needed would be provided by your motherboard manufacturer.
Date published: 2017-10-06
Bazaarvoice SAP Hybris Integration Version 2.8.1