USB 1.1 Over Cat5 Superbooster™ Extender Wall Plate Kit
#29342
C2G
USB 1.1 Over Cat5 Superbooster Extender Wall Plate Kit is rated
out of
5 by
7.
Bazaarvoice SAP Hybris Integration Version 2.8.1
$189.99 $210.99 MSRP USD
Conquer USB length limitations, and put your USB devices where you want them with our patent-pending USB superbooster wall plate. This wall plate solution extends the distance of a USB device to a host computer up to 150 feet so you can place your USB projector, camera, printer, web cam, hub, or any other USB device exactly where you want it! This wall plate is powerful yet simple, with no drivers to install or special software required so it's compatible with any computer that supports USB.
This plug-and-play device consists of a transmitter unit and a receiver unit incorporated into two, single gang wall plates. The transmitter/receiver pair is connected via standard Cat5, Cat5E, or Cat6 patch cables (not included) allowing for easy in-wall installation. This provides a clean, finished installation that is important for homes, classrooms, offices or any other facility where you don't want unsightly visible cables lying around.
Use pre-terminated network cables or pull unterminated cable and terminate with toolless IDC RJ45 connectors (included). Bus-powered, the USB superbooster wall plate requires no external power source. Compliant with USB Specification 1.1.
Transmitter Connectors: One USB Type B Female (Input) and One RJ45 Female (Output)
Receiver Connectors: One RJ45 Female (Input) and One USB Type A Female (Output)
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product
This plug-and-play device consists of a transmitter unit and a receiver unit incorporated into two, single gang wall plates. The transmitter/receiver pair is connected via standard Cat5, Cat5E, or Cat6 patch cables (not included) allowing for easy in-wall installation. This provides a clean, finished installation that is important for homes, classrooms, offices or any other facility where you don't want unsightly visible cables lying around.
Use pre-terminated network cables or pull unterminated cable and terminate with toolless IDC RJ45 connectors (included). Bus-powered, the USB superbooster wall plate requires no external power source. Compliant with USB Specification 1.1.
Transmitter Connectors: One USB Type B Female (Input) and One RJ45 Female (Output)
Receiver Connectors: One RJ45 Female (Input) and One USB Type A Female (Output)
Please Note: The power demands of devices such as external drives and USB hubs may require the use of external power for proper operation.
Note: If the USB signal is being extended to support an interactive whiteboard, then we recommend using our product
Connector 1:
(1) USB-B Female
Connector 2:
(1) USB-A Female
Quantity
105 In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Product Line | C2G | ||
| Color | White | ||
| UPC Number | 757120293422 | ||
| Country Of Origin | China | ||
| Application Sector | Residential, Commercial | ||
| Warranty Type | 5-Year | ||
| Type | Extender, Wall Plate, Kit, Active Device |
Dimensions
| Product Width US | 1.31 in | ||
| Product Weight US | 0.64 lb | ||
| Product Depth US | 1.34 in | ||
| Product Height US | 4.13 in |
Technical Information
| Number of Gangs | 1 | ||
| Data Transfer Rate | 12 Mbps |
Resources
Cutsheet
White Papers & Tech Bulletins
Reviews
Rated 5 out of
5
by
ITMITD8TR from
Works Great
Set this up in two smart board classrooms and my personal theater room. USB extender units work flawless. Great item for a HTPC setup. Used in conjunction with a HDMI over Cat5E extender from SII, to keep my Full tower size HTPC located in my computer room and be able to view HTPC 1080p HDMI in my Theater room 60' away. I can keep my rather large LED lit PC and resultant fan noise / light and heat on my HTPC in a seperate room away from the theater room. Using these extenders allows me to control the PC just as if it was in the room. I use a Interlink wireless keyboard/trackball with 100' range. USB extenders work perfect....
Date published: 2010-05-10
Rated 5 out of
5
by
jbellrmr from
Works perfectly
Works perfectly but must not strain the transmitter end USB connection or it will break. Just take ordinary precautions to unplug when not in use.
Date published: 2012-05-09
Rated 5 out of
5
by
Poppie831 from
USB Superbooster
With keyboard limitations at 6 feet the USB Superbooster has enabled me to place my key board at the front of the 20 plus training rooms I maintain. The installaion was simple with each end clearly marked and the design of the units allowed me to wall mount and blend in with all other low voltage devices, The units "DID NOT create a eye soar for my students.
Date published: 2012-06-20
Rated 3 out of
5
by
Gman from
No more USB wires!
This product allows the user to place USB devices at further distances by utilizing CAT5/6 network cabling. The only drawback is that is has only one type of USB input on the transmitter and it should allow for multiple USB cable connectors.
Date published: 2011-03-01
Rated 2 out of
5
by
Ford Van Man from
USB 1.1 is not USB 2.0
I put computer and printers in a closet about 30' from monitor. I use a wireless keyboard and mouse. I need a cable to operate the webcam from the monitor -- USB requires amplification to cover the distance. I should have investigated the webcam USB requirements -- didn't occur to me that the USB Superbooster Wall Plate Kit by CablesToGo would not be sufficient for the task.
Date published: 2010-03-03
Rated 5 out of
5
by
KAK from
They work great !
I am a Engineer/Contractor. Unfortunately the wrong wire was pulled because my Locksmith gave me the wrong info for a programmable lock. The wall plate unit was a cheap, reliable, and easy fix that saved me and my client a lot of work and money.
Date published: 2009-05-04
Rated 5 out of
5
by
Gale from
Happy customer
I want products that work, firstly. Don't like a lot of cluttering razz-ma-tazz. Time after time you guys have what I am looking for, and quality is excellent.
Date published: 2009-06-16
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
I have a USB extensor kit. Which part number goes to the device and which should be located at the computer?
The wall plate with the USB "B" side (square shaped) goes close to the computer. The plate with the USB "A" (rectangular) connector goes by the device.
Date published: 2017-10-06
Bazaarvoice SAP Hybris Integration Version 2.8.1